EN
Provide you with enterprise-level interconnection chips
Hot-swappable I2C and SMBus bus buffers are supported
I2C bus standard mode, fast mode, and bidirectional data transmission are supported
1V pre-charging on all SDA and SCL lines is supported to prevent hot-swapping damage
The high-impedance state of the I2C pin after power-down is supported
Clock stretching, arbitration, and synchronization are supported
Operating voltage: 2.3-5.5V
Operating temperature: -40°C~85°C
Package: MSOP8
The INTL9511 is a hot-swappable I2C bus buffer that supports the insertion of I/O cards into a powered backplane without damaging data or clock lines. The control circuit prevents the backplane-side I2C line (input) from directly connecting to the board-side I2C line (output) (until a stop command or bus idle condition appears on the backplane), without causing bus frame errors on the board. When the I2C bus is idle, the INTL9511 can be placed in an off mode by setting the EN pin to a low level, thus reducing power consumption. When EN is pulled high, the INTL9511 resumes normal operation.
Application Diagram
Server
Storage
Switch
Router
Base station
Industrial automation
Service hotline：
Email：public@taozhuanlianmeng.com
Headquarters：Room 2106, Block C, Maoye Center, No. 28, Tianfu Avenue North, High-tech Zone, Chengdu
Branches：Beijing, Shanghai, Shenzhen, Hangzhou, Xiamen, Zhuhai
Scan the Silicon Innovation QR code to follow
Copyright ? 2019-2025 2026美加墨世界杯平臺排行榜 - 觀賽與預測網站推薦 版權所有 備案編號: 蜀ICP備2022009451號 川公網安備 51019002004893號
